EPDM roofing, known for its durability and cost-effectiveness, has become a popular choice for residential and commercial buildings alike. If you’re a DIY enthusiast and considering installing an EPDM roof for your property in Rochester, Upstate New York, this step-by-step guide will help you understand the installation process. However, keep in mind that roofing projects can be complex and require specialized skills and equipment. For a flawless installation and to ensure your roof’s longevity, it’s always best to reach out to the experts at Rochester PRI Roofing. If you’re up for the challenge, let’s dive into the guide.

Step 1: Preparation and Safety

Before you start any roofing project, safety should be your top priority. Ensure you have the proper safety gear, including gloves, eye protection, and a stable ladder. Clear the roof of any debris and make sure the surface is clean and dry before proceeding.

Step 2: Roof Measurement and Material Calculation

Accurate measurements are crucial for ordering the right amount of EPDM material. Measure the length and width of your roof, taking into account any overhangs or additional areas that may require coverage. Calculate the total square footage and consult your local supplier or Rochester PRI Roofing for guidance on the amount of EPDM material needed.

Step 3: Ordering EPDM Material

Place an order for EPDM roofing material from a reputable supplier. Rochester PRI Roofing can assist you in finding the right type and size of EPDM membrane for your specific roof dimensions.

Step 4: Gather Tools and Equipment

Ensure you have all the necessary tools and equipment for the installation, including a utility knife, adhesive, roller, and seam cleaner. Rochester PRI Roofing can recommend high-quality tools and supplies for your DIY project.

Step 5: Start the Installation

Begin by unrolling the EPDM membrane carefully on the roof surface, making sure it covers the entire area with some overhang on all sides. Position the membrane properly, ensuring it is straight and free of wrinkles or bubbles.

Step 6: Adhering the EPDM Membrane

Use the recommended adhesive to secure the EPDM membrane in place. Start from one side and work your way to the other, using a roller to ensure strong adhesion. Be cautious not to trap air or moisture beneath the membrane.

Step 7: Dealing with Seams

If your roof requires multiple pieces of EPDM membrane, you’ll need to join them using a seam cleaner and seam adhesive. Follow the manufacturer’s instructions closely to create secure and watertight seams.

Step 8: Install Flashings and Edging

To ensure complete protection, install EPDM flashings around any roof penetrations, such as vents and chimneys. Additionally, secure edge trims to give your roof a clean and finished appearance.

Step 9: Final Inspection

Inspect the entire roof carefully to ensure there are no loose edges, bubbles, or wrinkles. A properly installed EPDM roof should be smooth and evenly adhered to the surface.

While EPDM roofing installation can be a rewarding DIY project, it’s crucial to recognize that it requires precision and expertise. If you find the process overwhelming or encounter any challenges, don’t hesitate to contact the professionals at Rochester PRI Roofing. Our experienced team can provide expert installation services, ensuring your EPDM roof performs optimally and lasts for years to come. Safety and quality are our priorities, and we are here to assist you with all your roofing needs in Rochester, Upstate New York.